Steel frame structure of powdery materials production line

Dry mix mortar sorts of normal mortar (ordinary bonding mortar, concrete block special thin bed mortar, heat preservation of the bonding mortar) and special mortar (binding mortar: such as ceramic tile adhesive, adhesives, thermal insulation composite system special bonding mortar etc; plastering mortar: such as the external walls of external thermal insulation, be bored with child, render color adornment mortar, heat insulation mortar, etc.; the bonding mortar) two categories, the factory output in bulk and bag two methods. Use ready-mixed mortar, cancel the mixing the construction industry on site is the new rules.
        The company, designs and manufacturse different dry mortar production lines, the production from 2-50 tons /hour.
        Ordinary dry mortar production line generally applies the steel structure, the typical way is to put the raw materials (sand, cement, fly ash, and admixture, pigment, polymer, short fibers) through the pneumatic conveying pot and measured respectively, and after automatic mixing, the mixture of material is the finished product. The finished product will be packed by packaging scale or transported to the user by truck. Due to the large demand of the product, the production lines are required, and the sand are needed in large amount, so the requirements of the equipment is also higher. The equipment configuration requires baked sand device.
  Special dry mortar can be produced by the above line, as the yield is not high, the equipment capacity can be adjusted accordingly, considering the height, also can use the method of piecewise ascension, this helps to control the construction cost, and convenient maintenance.
       The company has designed various production lines, in the nearly past five years we have made more than 150 sets of production lines in the dry mortar industry. At present, the foreign enterprise, such as Germany BASF company in China's large factory and domestic famous brand enterprises purchased the equipment from Conly. 
        The company's dry mortar production line has high steel type, layered steel type, the pneumatic conveying type, block type, and simple type, are highly approved by different users.
        The principle of High-rise steel type principle is production line for normal mortar, and its advantage that raw material is transported by the pneumatic conveying system directly into the large bunker, the equipment as follows from up to down, silo-automatic batch-mixing-finished product storage-packing, and the production is automatically operated, the process is controlled by computer, ingredients accurate, so many Chinese and foreign large enterprise use this kind of production line.
       Layered steel type production line reduces the height of the silos. Many users consider the investment cost, and the production efficiency, the hierarchical structure of the production line is choosed, currently 5~ 20 tons/hour production line, the production of batching scale on the ground floor of the factory is, ingredients, the raw material of silo by screw conveyor to batching scale measurement, complete measurement through ascension to the blender mixing machine, stir in storehouse again by complete finished product packing machine factory packaging. This structure low investment, without personnel on the platform operation, the domestic use more, but this kind of structure requires raw material.Layered steel type production line reduces the height of the silos. Many users consider the investment cost, and the production efficiency, the hierarchical structure of the production line is choosed, currently 5~ 20 tons/hour production line, the production of batching scale on the ground floor of the factory is, ingredients, the raw material of silo by screw conveyor to batching scale measurement, complete measurement through ascension to the blender mixing machine, stir in storehouse again by complete finished product packing machine factory packaging. This structure low investment, without personnel on the platform operation, the domestic use more, but this kind of structure requires raw material.Pneuamtic conveying production line is the combination of top steel type and layered steel type combination, reasonablely solves the contradiction between high-level steel type and stratification steel type. It consists of a weighing and pneumatic conceying pot, kinds of raw materials are transported to the cushion hopper by the compressed air, under the cushion hopper there are mixer, finished product silo, and packaging machine. Pipes are applied in the transportation system, and screw conveyor and elevator machine are not needed. In the circumstance of low height of the workshop, saving the investment and convenient to operate. Now many foreign companies and domestic enterprises are using the system manufactured by Conly.Under the condition of the specific factory, many users choose the simple type dry mortar production line, only use elevator machine, mixer, finished product silo, and packaging machine for the production. Some Users also have adopted the automatic control block dry mortar production line, wet ingredients production line manufactured by Conly.